Volumetric water softener AVT line

The water treated by this softener will have a reduction of the salts responsible for its hardness, through the regulation of the hardness mixer present in the valve body, it is possible to obtain the desired hardness value.
The electronic volumetric control valve regenerates the resins only when the flow meter detects the set value of treatable water; in any case, the valve software will perform a "forced" regeneration every 4 days.
The softeners are delivered already programmed and ready for installation and start-up. They do not require any device
anti-overflow or "overflow" as they are equipped with a safety float valve as standard.

For correct operation, we recommend using water softening salt tablets.

DATASHEET

AVT 5 - Cyclic capacity 450 L

Dimensions : L.22 x D.36 x H.48 cm
Operating pressure : min 1.8 - max 5 bar
Water temperature : min 5° C - max 35° C
Cyclic capacity (40° f hardness) : 450 lt
Resin content : 3.5 lt
Average salt consumption for regeneration : 700 gr
Power consumption : 10 W
Power supply : 220 V - 50 Hz
Empty weight : 8 kg

AVT 9 - Cyclic capacity 1200 L

Dimensions : L.32 x D.50 x H.60 cm
Operating pressure : min 1.8 - max 5 bar
Water temperature : min 5° C - max 35° C
Cyclic capacity (40° f hardness) : 1200 lt
Resin content : 9 lt
Average salt consumption for regeneration : 1800 gr
Power consumption : 10 W
Power supply : 220 V - 50 Hz
Empty weight : 15.5 kg

AVT 12 - Cyclic capacity 1500 L

Dimensions : L.36 x D.54 x H.63 cm
Operating pressure : min 1.8 - max 5 bar
Water temperature : min 5° C - max 35° C
Cyclic capacity (40° f hardness) : 1500 lt
Resin content : 12 lt
Average salt consumption for regeneration : 2200 gr
Power consumption : 10 W
Power supply : 220 V - 50 Hz
Empty weight : 19 kg

AVT 15 - Cyclic capacity 1900 L

Dimensions : L.32 x D.50 x H.81 cm
Operating pressure : min 1.8 - max 5 bar
Water temperature : min 5° C - max 35° C
Cyclic capacity (40° f hardness) : 1900 lt
Resin content : 15 lt
Average salt consumption for regeneration : 2900 gr
Power consumption : 10 W
Power supply : 220 V - 50 Hz
Empty weight : 23 kg

AVT 18 - Cyclic capacity 2200 L

Dimensions : L.32 x D.50 x H.106 cm
Operating pressure : min 1.8 - max 5 bar
Water temperature : min 5° C - max 35° C
Cyclic capacity (40° f hardness) : 2200 lt
Resin content : 18 lt
Average salt consumption for regeneration : 3500 gr
Power consumption : 10 W
Power supply : 220 V - 50 Hz
Empty weight : 29 kg

AVT 30 - Cyclic capacity 3800 L

Dimensions : L.32 x D.50 x H.106 cm
Operating pressure : min 1.8 - max 5 bar
Water temperature : min 5° C - max 35° C
Cyclic capacity (40° f hardness) : 3800 lt
Resin content : 30 lt
Average salt consumption for regeneration : 5700 gr
Power consumption : 10 W
Power supply : 220 V - 50 Hz
Empty weight : 41 kg
Resin disinfection kit as standard