Chatta con noi

Walk-in freezer with wall mounted refrigeration unit and floor -15°/-20° C, width 260 cm

Ref: RF_03034

Made in italy

5.799,00 € (price excluding 22% VAT)

€7,074.78 (price with 22% VAT included)

Can be ordered in the following depths : 260 and 300 cm Can be ordered in the following heights : 220 and 260 cm

Depth

Height

Voltage

Single-phase
Three-phase

Ask a Quote

100% secure payments

Send to a friend > Information request

Ask a Quote

Accessories

	Can be ordered in lengths between 60 and 200 cm	SCAFFALATURA A 4 PIANI IN POLIPROPILENE - P.40 x H.160 cm €299.00
	Can be ordered in lengths between 60 and 200 cm	SCAFFALATURA A 4 PIANI IN POLIPROPILENE - P.40 x H.180 cm €309.00
	Can be ordered in lengths between 60 and 200 cm	SCAFFALATURA A 4 PIANI IN POLIPROPILENE - P.40 x H.200 cm €319.00
		Kit illuminazione per celle frigorifere €99.99

Designed to satisfy any type of modern conservation need. The high quality of our cold rooms and our innovative production process allow us to comply with the most restrictive health and hygiene standards with high flexibility and speed of assembly.
Made up of 10cm thick modular panels. The insulation is achieved with the injection of rigid polyurethane foam with a density of 40 - 42 kg/m3 (95% closed cells). The panels are locked using eccentric hooks. The floor and ceiling panels are positioned hidden inside the vertical ones in order to ensure a harmonious aesthetic appearance. The internal and external cladding of the walls is made of non-toxic pre-painted white sheet metal, while the floor is made of non-slip Aisi 304 stainless steel with adequate internal support for better load distribution. On request, wall coverings in white pre-painted sheet metal or Aisi 304 stainless steel and reinforced floors for greater loads are available.

The monobloc construction allows for a ready-to-use system that is easy to install and use.
The low temperature cells are equipped with an anti-condensation heater inserted in a special profile in the door compartment. This measure facilitates removal in case of replacement.

Standard equipment: non-slip stainless steel floor.

Technical features :
• Zippers easily adjustable in 3 directions
• Standard handle with key lock and internal safety release
• Standard non-slip stainless steel floor with integrated internal support
• Floor + panel: simple and quick assembly via fixing with eccentric hook

TECHNICAL DATA SHEETS for cells H.220 cm

Dimensions : L.260 x D.260 x H.220 cm

Volume : 11.52 m³
Power supply (motor) : 230 V / 1 / 50 Hz 400 V / 3 / 50 Hz
Power (engine) : 1.4 kW - 1.9 Hp
Consumption : 2.8 kW

Dimensions : L.260 x D.300 x H.220 cm

Volume : 13.44 m³
Power supply (motor) : 230 V / 1 / 50 Hz - 400 V / 3 / 50 Hz
Power (engine) : 1.77 kW - 2.4 Hp
Consumption : 3.7 kW

TECHNICAL DATA SHEETS for H.260 cm cells

Dimensions : L.260 x D.260 x H.260 cm

Volume : 13.82 m³
Power supply (motor) : 230 V / 1 / 50 Hz - 400 V / 3 / 50 Hz
Power (engine) : 1.77 kW - 2.4 Hp
Consumption : 3.7 kW

Dimensions : L.260 x D.300 x H.260 cm

Volume : 16.13 m³
Power supply (motor) : 230 / 1 / 50 Hz - 400 V / 3 / 50 Hz
Power (engine) : 1.77 kW - 2.4 Hp
Consumption : 3.7 kW

Reference RF_03034_55991

Data sheet

Made in Italy: Yes
Temperature: -25° / -18° C
Length: and 250 to 299 cm
Width: and 250 to 299 cm
a partire da 300 cm
Flooring: con pavivemto
Dimensions (LxDxH cm): 260 x 260 x 220
260 x 260 x 260
260 x 300 x 220
260 x 300 x 260
Temperature (°C): -20 / -15
Electrical power (W): 1400
1770
Power (V/P/Hz): 400 / 3 / 50