Chatta con noi

NEGATIVE COLD ROOM (-15/-20 °C) WITH CROSSED MONOBLOCK ENGINE AND FLOOR - WIDTH 200 cm

Walk in freezer with wall mounted motor and floor, width 200 cm

Ref: RF_02655

Made in italy

5.099,00 € (price excluding 22% VAT)

€6,220.78 (price with 22% VAT included)

Can be ordered in the following depths : 200, 260 and 300 cm Can be ordered in the following heights : 220 and 260 cm

Depth

Height

Voltage

Single-phase
Three-phase

Ask a Quote

100% secure payments

Send to a friend > Information request

Ask a Quote

Accessories

	Can be ordered in lengths between 60 and 200 cm	SCAFFALATURA A 4 PIANI IN POLIPROPILENE - P.40 x H.160 cm €299.00
	Can be ordered in lengths between 60 and 200 cm	SCAFFALATURA A 4 PIANI IN POLIPROPILENE - P.40 x H.180 cm €309.00
	Can be ordered in lengths between 60 and 200 cm	SCAFFALATURA A 4 PIANI IN POLIPROPILENE - P.40 x H.200 cm €319.00
		Kit illuminazione per celle frigorifere €99.99

Designed to meet any type of need of modern conservation. The high quality of our cold rooms and our innovative production process allow us to comply with the most restrictive hygiene and health standards with a high flexibility and speed of assembly.
Composed of 10 cm thick modular panels. The insulation is made with the injection of rigid polyurethane foam with a density of 40 - 42 kg/m3 (95% closed cells). The panels are locked using eccentric hooks. The floor and ceiling panels are positioned concealed inside the vertical ones to ensure a harmonious aesthetic appearance. The internal and external wall coverings are made of non-toxic pre-painted white sheet metal, while the floor is made of non-slip Aisi 304 stainless steel with adequate internal support for better load distribution. Wall coverings in white pre-painted sheet metal or Aisi 304 stainless steel and reinforced floors for greater loads are available on request.

The monoblock execution allows for the creation of a ready-to-use system, easy to install and use.
The low temperature cells are equipped with an anti-condensation resistance inserted in a special profile of the door compartment. This feature facilitates its removal in case of replacement.

Standard equipment: non-slip stainless steel floor.

Technical features :
• Hinges easily adjustable on-site in 3 directions
• Standard handle with key lock and internal safety release
• Standard non-slip stainless steel floor with integrated internal support
• Floor + panel: quick and easy assembly via eccentric hook fastening

TECHNICAL DATA SHEETS for cells H.220 cm

Dimensions : L.200 x D.200 x H.220 cm

Volume : 6.48 m3
Power supply (motor) : 230 V / 1 / 50 Hz - 400 V / 3 / 50 Hz
Power (engine) : 1.4 kW - 1.9 Hp
Consumption : 2.8 kW

Dimensions : L.200 x D.260 x H.220 cm

Volume : 8.64 m3
Power supply (motor) : 230 V / 1 / 50 Hz - 400 V / 3 / 50 Hz
Power (engine) : 1.4 kW - 1.9 Hp
Consumption : 2.8 kW

Dimensions : L.200 x D.300 x H.220 cm

Volume : 10.08 m3
Power supply (motor) : 230 V / 1 / 50 Hz - 400 V / 3 N / 50 Hz
Power (engine) : 1.4 kW - 1.9 Hp
Consumption : 2.8 kW

TECHNICAL DATA SHEETS for cells H.260 cm

Dimensions : L.200 x D.200 x H.260 cm

Volume : 7.78 m3
Power supply (motor) : 230 V / 1 / 50 Hz - 400 V / 3 / 50 Hz
Power (engine) : 1.4 kW - 1.9 Hp
Consumption : 2.8 kW

Dimensions : L.200 x D.260 x H.260 cm

Volume : 10.37 m3
Power supply (motor) : 230 V / 1 / 50 Hz - 400 V / 3 N / 50 Hz
Power (engine) : 1.4 kW - 1.9 Hp
Consumption : 2.8 kW

Dimensions : L.200 x D.300 x H.260 cm

Volume : 12.1 m3
Power supply (motor) : 230 V / 1 / 50 Hz - 400 V / 3N / 50 Hz
Power (engine) : 1.4 kW - 1.9 Hp
Consumption : 2.8 kW